Applications Large scale helis & Fixed-wing aircraft (using serval servos)
1
As Voltage Regulator, Power LED Supply
1
Brushless Motor Scorpion S30 series (S30 II 3032-690KV)
4
Brushless Motor Scorpion S55 series (S-5525-170 or 195KV or S5535-160KV) with 12s Lipo (2x 5000mAh 6S, 40~60C)
4
Brushless Motor Scorpion S55 series (S-5535-160KV with 12s Lipo (2x 5000mAh 6S, 40~60C)
2
Charging Adaptor EC5 with Silicone Wire AWG12, Length 40cm
1
Charging Adaptor XT60 with Silicone Wire AWG14, Length 40cm
1
Charging Adaptor from XT60 to XT30
3
Charging Adaptor from XT90 to XT60
1
Charging Plug XT30 with Silicone Wire AWG16, Length 40cm
1
Convert Connector from XT60 to T-Plug
2
Convert XT90 Connector to EC5
1
Drone Integrators, Landing Gear sys, UAV Frames, etc..
1
Drones
4
For Canon 5D Mark III Lens: Canon EF 24mm f/2.8 IS USM
1
For DIY, Agriculture, etc. Multicopters. NEM motor plate combine with the nem's boom clamps, can accept Almost ALL brushless motors from 4114, 8318, A100, U15 II, etc..
1
For DIY Frames, Landing Gear Systems, Motor Arms, etc..
25
For DIY Multicopter Motor Arms. NEM motor base can accept brushless motors from D25 - 65mm diameter
2
For DIY Multicopter Tripod Landing Gear Seat
1
For LEDs, FPV Transmitter, Voltage Regulator, as Tool to Supply Stabilizing Power. Accept Lipo Battery up to 13s
1
For LEDs, FPV Transmitter, as Tool to Supply Stabilizing Power. Accept Lipo Battery up to 6s
4
For Mini Drones, Multicopters
3
For Shoulder Screws, Bolts 3,0mm
1
For Shoulder Screws, Bolts 3,0mm, Durable and Anti-Slip, Star Lock Washer with outer tooth
1
For Shoulder Screws, Bolts 3,0~ 3.4mm
1
For devices that need current less than 8 Amps e.g. BEC, Transmitter for FPV up to 2 Watts
1
For devices that need current less than 8Amps e.g. BEC, Transmitter for FPV up to 2 Watts
5
Heavy Duty servo connector (2~ 7 Amps). It can be used to make connections between RC Servos, Controllers, Receivers, ESCs, 3-Pin Sensors, etc.
2
LIPO Chargers
1
Landing Gear, Drone Frames, drone integrators, manufactures
1
PIX4, PIXhawk, APM, Flight Controller
1
PIX4, PIXhawk, APM, for Power Module
1
Panasonic:GH3 with Lens: OLYMPUS M.ZUIKO DIGITAL ED 12mm f2.0
1
Parallel Adaptor Increase Capacity from two Lipos
1
Serial Adaptor Increase Voltage from two Lipos
7
Suitable for various electric insulation and bonding of cables and connectors. Widely applied for connecting or end-handling, electric wire, connectors, protection from corrosion-proof of metallic rods or tubes.
4
Super Flex PVC Servo cable for Minimal Vibration to Flight Controllers, Sensors, Auto Pilots. Secure Connections due to Gold Plated Connectors.
2
Super Flex Silicone Servo cable for Minimal Vibration to Flight Controllers, Sensors, Auto Pilots. Secure Connections due to Gold Plated Connectors.
1
The Socket Button Head screws are ideal for precision work with close tolerances and applications needing a well tooled appearance.
15
The Socket Head Button screws are ideal for precision work with close tolerances and applications needing a well tooled appearance.
2
The Socket Head Cap screws are ideal for precision work with close tolerances and applications needing a well tooled appearance.
12
This product is suitable for NEMesis Metal Racing Drone Frame, PCB, Coupling rod, Pull rod, Support Pillar, etc
1
This product is suitable for NEMesis Racing Drone Frame, Carbon version, PCB, Coupling rod, Pull rod, Support Pillar, etc
1
This product is suitable for NEMesis Racing Drone Frame, PCB, Coupling rod, Pull rod, Support Pillar, etc
1
This product is suitable for fastening Frames, PCB, Coupling rod, Pull rod, Support Pillar, etc
4
This product is suitable for landing Gears, Spacer, PCB, Coupling rod, Pull rod, Support Pillar, etc
1
Those lightweight part can be used to mount any round tube with 20 and 25mm diameter. Thickness of Carbon tubes must be 1mm, for example: Carbon Fiber Tube Diameter 25mm Inside nust be 23mm, for example: Carbon Fiber Tube Diameter 25mm Inside must be 23mm
1
Those lightweight part can be used to mount any round tube with 25 ans 30mm diameter. Thickness of Carbon tubes must be 1mm, for example: Carbon Fiber Tube Diameter 30mm Inside nust be 28mm
1
Those lightweight part can be used to mount any round tube with 25mm diameter
2
Those lightweight part can be used to mount any round tube with 30mm diameter.
1
Those lightweight part can be used to mount any round tube with 35mm diameter
2
Those lightweight part can be used to mount any round tube with 35mm diameter. Also can accept 40mm diameter Carbon tube with 1mm thickness (inside must be 38mm). For example: Carbon Fiber Tube Diameter 40mm Inside nust be 38mm
2
Those light weight part can be used to mount any round tube with 45mm diameter
1
Those lightweight parts can be used to mount any round tube with 16mm diameter
4
Those lightweight parts can be used to mount any round tube with 22mm diameter
1
Those lightweight parts can be used to mount any round tube with 25mm diameter
1
Those lightweight parts can be used to mount any round tube with 30mm diameter
2
Those lightweight parts offer very good vibration absorbance
2
To Convert your Power Connector from T-Plug Female to EC5 Male or the opposite
1
To Convert your Power Connector from T-Plug to EC5 Female or the opposite
1
To Convert your Power Connector from T-Plug to XT60 connector
1
To Convert your Power Connector from XT60 Plug to EC3 Plug
1
To Convert your Power Connector from XT60 Plug to EC5 female-Plug
2
To Convert your Power Connector from XT60 Plug to T-Plug
3
To ensure a secure hold for your screws.
3
To use for your Flight Controller to run regulated current to your sensitive FC.
1
Use for low Amps devices up to 0.5~2 Amps
1
Use it for DSLR Gimbals for Stand
1
Use it with Alexmos 32-Bit Controller
1
Use them with Silicone Cable (8-10AWG/0.5mtr.) Perfect for applications up to 150 Amps continuous current and beyond 250A instantaneous current
2
Use them with Silicone Cable (8-10AWG/0.5mtr.) Perfect for applications up to and beyond 250A continuous draw
1
Use them with Silicone Cable (12 -14AWG/0.5mtr.) Perfect for applications up to 60 Amps
1
Use them with Silicone Cable (12 -16AWG/0.5mtr.) Perfect for applications up to 65 Amps continuous current and beyond 250A instantaneous current
2
Use them with Silicone Cable (12 -16AWG/0.5mtr.) Perfect for applications up to 85 Amps continuous current and beyond 250A instantaneous current
2
Use them with Silicone Cable (12 -18AWG/0.5mtr.) Perfect for applications up to 20 Amps
1
Use them with Silicone Cable (14 -18AWG/0.5mtr.) Perfect for applications up to 20 Amps
1
Use them with Silicone Cable (16 -22AWG/0.5mtr.) Perfect for applications up to 9 Amps
1
Use with Silicone Cable (08~10AWG/0.5mtr.) power up to for connectors 150A (with 8AWG) constant current
1
Use with Silicone Cable (8AWG) Perfect for applications up to and beyond 150A continuous draw
1
Use with Silicone Cable (8~12AWG)
2
Use with Silicone Cable (10-12AWG/0.5mtr.)
1
Use with Silicone Cable (10AWG/0.5mtr.) Use with Silicone Cable (10~12AWG/0.5mtr.) Perfect for applications up to and beyond 120A continuous draw
2
Use with Silicone Cable (10AWG/0.5mtr.) power up to 12A constant current
1
Use with Silicone Cable (10AWG/0.5mtr.) power up to 90A constant current
4
Use with Silicone Cable (10AWG/0.5mtr.) power up to 120A constant current
2
Use with Silicone Cable (10AWG/0.5mtr.) power up to 180A constant current
1
Use with Silicone Cable (10AWG/0.5mtr.) power up to 190A constant current
1
Use with Silicone Cable (10~12AWG/0.5mtr.) Use with Silicone Cable (10~12AWG/0.5mtr.) Perfect for applications up to and beyond 75A continuous draw
1
Use with Silicone Cable (10~12AWG/0.5mtr.) Use with Silicone Cable (12~14AWG/0.5mtr.) Perfect for applications up to and beyond 65A continuous draw
2
Use with Silicone Cable (12-14AWG/0.5mtr.)
1
Use with Silicone Cable (12AWG/0.5mtr.) Use with Silicone Cable (12~14AWG/0.5mtr.) Perfect for applications up to and beyond 65A continuous draw
2
Use with Silicone Cable (12AWG/0.5mtr.) power up to 60A constant current
2
Use with Silicone Cable (12AWG/0.5mtr.) power up to 65A constant current
1
Use with Silicone Cable (12~14AWG/0.5mtr.) Perfect for applications up to and beyond 65A continuous draw
1
Use with Silicone Cable (12~16AWG/0.5mtr.) power up to for connectors 40A (with 14AWG) constant current
1
Use with Silicone Cable (12~16AWG/0.5mtr.) power up to for connectors 65A (with 12AWG) constant current
1
Use with Silicone Cable (14AWG/0.5mtr.) power up to 30A constant current
1
Use with Silicone Cable (14~16AWG/0.5mtr.) power up to 65A constant current
1
Use with Silicone Cable (14~18AWG/0.5mtr.) power up to for connectors 65A (with 12AWG) constant current
3
Use with Silicone Cable (14~20AWG/0.5mtr.) power up to for connectors 30A (with 14AWG) constant current .
2
Use with Silicone Cable (14~20AWG/0.5mtr.) power up to for connectors 35A (with 14AWG) constant current .
1
Use with Silicone Cable (16~22AWG/0.5mtr.) power up to for connectors 20A (with 14AWG) constant current
1
Use with Silicone Cable (16~22AWG/0.5mtr.) power up to for connectors 30A (with 14AWG) constant current
1
Use with Silicone Cable (16~22AWG/0.5mtr.) power up to for connectors 30A (with 14AWG) constant current .
1
Use with Silicone Cable (18AWG/0.5mtr.) power up to 12A constant current
1
Use with Silicone Cable (20~26AWG/0.5mtr.) power up to for connectors 6A (with 20AWG) constant current
5
drone integrators, manufactures
2
for: CANON 5DMarkII/5D Mark III,7D,SONY α900, NIKON D900/D800E/D700/D800 etc)
1
for Anti vibration, Shock Absorber. Best for Flight Controllers (FC)
1
for Balancer Board to your Lipo Charger.
1
for PIXhawk, PIX4
1
for screws (Hand -tight after approx. 10-15 minutes)
1