Search

Introduction:This module is a nice little relay switch controlled by a spare auxiliary channel on your receiver. Ideal for switching lights, sound, and any other auxiliary electrical items. When PWM duty is more than 1500us, the switch will turn on; when PWM duty is less than 1400us, the switch w..

PWM RC Electronic Relay Switch 20A (direct apply to your RC Receiver, almost ALL Receivers) for DIY Models, RC Planes, Helicopters, Boat, Cars. Light and Function Controller. 300 Watt Power!.Sort Discription:  - Plug the Input Signal Cable into to your (PPM) Receiver (Channels 5,6,7,8,9,10..

Features:Made of high grade material, which is durable, solid and eco-friendly. Adopts 60 cores with 0.08mm diameter cable, excellent tensile and low resistance. Can be used as a switch by connecting servo, ESC with receiver. With large passing current, a heavy duty switch ..

Adjustable Step Down Voltage Regulator, Input Voltage Range from 4.5~35V (input voltage must be higher than output voltage at least 1.5V). Continuously Adjustable Output Voltage from 1.5V -33.5V. Guaranteed 3A output load current (maybe it will need a cooling surface for continuous current). Th..

FPV BEC 12V 3A for 4s ~ 6s LipoOne more imagine high-tech electronic device for FPV devices.What it Does:Get Stabilizing 12V at 3A  from your Lipo Battery, Working from 4s up to 6s Lipo. You can connect your Wireless Devices (Transmitter, Gimbal, LED, etc..)What you Get:1 x BEC 12V 3A with cabl..

DUAL micro BEC 5V 3A or 12V 2A 2s ~ 6s LipoOne more imagine high-tech electronic device for FPV devices. This UBEC is ideal to provide FPV cameras and GoPro, Brushless Gimbals with a constant 5V voltage, Receivers at 5.0V, etc..High efficiency, suit for Telemetry, Brushless Gimbal, Flight Controller..

RGB 5050 LED Lights Board 7 Color 12V with DIP Switch to change the LED colors.This LED is suitable for light DIY on mutirotor, airplane, helicopter, RC car... etc. Sort Description: The LED Board adopts 3 pieces of RGB 5050 lamp beads, with DIP switch on board. According to toggle different switch..

RGB 5050 LED Lights Board 7 Color 16V with DIP Switch to change the LED colors.This LED is suitable for light DIY on mutirotor, airplane, helicopter, RC car... etc. Sort Description: The LED Board adopts 3 pieces of RGB 5050 lamp beads, with DIP switch on board. According to toggle different switch..

ZMR UBEC V3 8A for RC-Drones, Planes, Boats, etc..Sort Discription: Suitable for multi-rotor aircraft, fixed-wing, FPV, high-power image transmission, etc. (If 12V voltage is required, the input voltage must be higher than 12V) No external power-off switch is included. Switching technology to..