Balancer for 2~5s Lipo




Balancer for 2~5s Lipo
24.70€
Ex Tax: 19.92€
Your shopping cart is empty!
The MKS Battery Balancer/Discharger is designed for Li-Polymer and Li-Fe battery, it can execute balance work for series batteries, or for battery discharge in order to for long time storage to avoid battery damaged
The product balance function can allow battery execute balance function before/after charge and using(discharge), also can match-up market string voltage charger to execute devide voltage balancing function while charging.
What it Does:
What's in the Box:
MKS Battery Balancer for 2~5s Lipo
2 x Adaptors for Li-PO battery
Product Information | |
Tips | 1. Do not use in sun light. 2. Do not use in high temperature. 3. Do not connect 4 pin and 6 pin connectors at a same time. 4. Do not connect 2 balancers to a single pack. 5. If you finished using balancer, please unplug the thread. 6. When battery voltage is: > 0.005 mv the yellow light will turn on。 7. When battery voltage is: < 0.005 mv the green light will turn on。 8. If you use different 2 cell or 4 cell batteries, please purchase the special use connector |
In Depth | 1. Balance cells: 2 to 5 cells in series. 2. Balance start voltage: 4.1V or 3.2V => 0.03V 3. Bleeding current: Max 420mA. 4. Imbalance control voltage:+/-0.005V. 5. Under voltage warning:3.2V. 6. Over voltage warning:4.2V |
Power Informations | |
Balancer | Accept Lipo from 2s up to 5s |
Product Specification | |
Temperature (celcius) | This product comes with temperature sensor IC control, When the temperature inside exceeds 75°C. It will goes back to discharge when the temperature inside is lower than 65°C. It will shutdown discharge for a while |