CNC Motor Mount (dia. 22~65mm Motor) -25mm Tube

CNC Motor Mount for One or two Motors up to 65mm Motor Drum fit to F25mm Carbon / Aluminum Tube

Introduction:
CNC Processed Aluminum Alloy Motor Mount Bracket/Holder/Base. Designed by NEM for large size MultiRotors Frames (from 0.5 up to 2mtr), that use F25mm Tube/Pipe as Motor Arm.
The Best Steering way (2-methods) for your Motor and apply precisely the Thrust Torque in any degrees you may wish.  
NEM Motor Mount Providing Lightweight an Extra Strength, Firmly and Secure installation of your motor Arm tube.

Features:

• Motor Mount for 1 motor
• Motor Mount for 2 motors (just add the second plate included in the set)
  
• Fit to Carbon / Alumium Tube /Pipe : 25mm diameter
• Fit to Motors: From F28 up to F65mm Motor Drum (outside diameter of motor, example: T-Motor U7 V2 is 60.77mm DRUM)
• Motor holes: for M3mm screws From F19 ~ F32mm & M4mm screw D25mm Diameter

What you Get:
1 x Motor Mount  D25mm for BL Motors Drum (F25 ~ F65mm) -Black color
1 x Motor Mount Plate for second BL Motor with Drum (F25 ~ F65mm) -Black color
4 x M2.5x8mm stainless steel screws
1 x M3x35mm Button Head screw
1 x M3 secure nut