VQ Pilatus Porter 1.58m EP/GP ARF Model 46 size, Icarius Scheme -VQA0372
New Product
-40 %
VQ Pilatus Porter 1.58m EP/GP ARF Model 46 size, Icarius Scheme -VQA0372
Day
Hour
Min
Sec
148.80€
248.00€
Ex Tax: 120.00€
Your shopping cart is empty!
Pilatus Porter By VQ-Models, extremely Detail Scale Model Aircraft Kit
PC-6 Pilatus Porter History:
The Pilatus PC-6 Porter is a civilian utility aircraft built by Pilatus Aircraft of Switzerland. The first prototype made its maiden flight on 4 May 1959 powered by a 254 kW (340-shp) piston engine. The first Turbo Porter, powered by a turboprop, flew in 1961. The Turbo Porter received an engine upgrade in 1963, which increased its power to its present value of 410 kW (550-shp). In the United States, the Porter was manufactured under license by Fairchild Hiller. In service with the U.S. Air Force, it received the designation AU-23A Peacemaker. In U.S. Army use, it was designated UV-20 Chiricahua
The PC-6 is famous in the aviation world for its Short Take-off and Landing (STOL) performance on almost any type of terrain - it can take-off within a distance of 195 metres (640 ft) and land within a distance of 130 metres (427 ft) while carrying a payload of 1,500 kg (3,300 lb) (The length of a soccer field is enough, Pilatus test pilots were able to land on not much more than 50 metres (164 ft) of space). Thanks to its STOL performance, the PC-6 holds the world record for highest landing by a fixed wing aircraft, at 5,750 metres (18,865 ft), on the Dhaulagiri glacier in Nepal.
Product Description:
The full size PC-6 Pilatus Porter is a known 'STOL' workhorse capable of
operating in rugged, short-field conditions for light transport roles,
both civilian and military.The professional Painted Fiberglass Cowl as well as All Pre-Hinged Control surfaces, quarantee less time than you can imagine to Fly this incredible replica RC plane.
Features:
- All Balsa and lite-ply construction
- Fully covered in weathered detail
- Fiberglass cowling
- Control surfaces pre-hinged and installed
-Two piece wing with aluminium wing joiner
- Pilot door and rear door can open-close
- Big battery hatch for Electric version
What's in the Box: | What you Need to Fly: |
- Assembly instructions with stage photos - Plywood seat - Fiberglass cowling - Aluminium landing gear , & Wheels - Landing Struts - Aluminium wing joiner - Wing struts - Engine mounts, Fuel Tank - Spinner - Decals and all hardware | Radio System (Transmitter and Receiver) Servos and Battery Pack 4~6V Alternative you can use UBEC 5-10A 5/6 Volts Nitro Engine .46 size Two-Stroke or 52 Four-Stroke or Brushless Motor eg. (Scorpion S30 II series (eg. 3020/3032) for 4-5s Lipo S30 II 3032-690KV Electronic Speed Controller for Brushless Motors 70-100 Amps Glue, Silicone Fuel Line (for nitro engine, Fuel, and electric starter) Work for Assembly, Setup etc.. |
What you Get:
1 x VQ Pilatus Porter PC6 ARF Model Airplane kit
Technical Information | |
Servos | 4~5/6 servos (Rec. INO-LAB HGD-660MG or other type (Standard series servos)) |
Recommended | Brushless Motor Scorpion S30 series (S30 II 3032-690KV) |
Product Information | |
Tips | Can Be Nitro Powered or Electric Powered |
Wireless Devices / FPV Equipment | |
Channels | 4~6 channels |
Power Informations | |
Power | Nitro Engine .46 size -Two-Stroke, or Brushless Motor S30 seriesd |
Product Specification | |
Wingspan | 1580mm (62.20 inches.) |
Size and Weight Informations | |
Fuselage | 1160mm (45.7 in.) |
Weight | RTF: 2.2 - 2.5 kg |