VQ Pilatus Porter 2.72m (23-30cc) -ARF Scale AIrplane Kit -Bird Scheme

Pilatus Porter By VQ-Models, extremely Detail Scale Model Aircraft Kit

PC-6 Pilatus Porter History:
The Pilatus PC-6 Porter is a civilian utility aircraft built by Pilatus Aircraft of Switzerland. The first prototype made its maiden flight on 4 May 1959 powered by a 254 kW (340-shp) piston engine. The first Turbo Porter, powered by a turboprop, flew in 1961. The Turbo Porter received an engine upgrade in 1963, which increased its power to its present value of 410 kW (550-shp). In the United States, the Porter was manufactured under license by Fairchild Hiller. In service with the U.S. Air Force, it received the designation AU-23A Peacemaker. In U.S. Army use, it was designated UV-20 Chiricahua   
The PC-6 is famous in the aviation world for its Short Take-off and Landing (STOL) performance on almost any type of terrain - it can take-off within a distance of 195 metres (640 ft) and land within a distance of 130 metres (427 ft) while carrying a payload of 1,500 kg (3,300 lb) (The length of a soccer field is enough, Pilatus test pilots were able to land on not much more than 50 metres (164 ft) of space). Thanks to its STOL performance, the PC-6 holds the world record for highest landing by a fixed wing aircraft, at 5,750 metres (18,865 ft), on the Dhaulagiri glacier in Nepal.

Product Description:
The full size PC-6 Pilatus Porter is a known 'STOL' workhorse capable of operating in rugged, short-field conditions for light transport roles, both civilian and military.The professional Painted Fiberglass Cowl as well as All Pre-Hinged Control surfaces, quarantee less time than you can imagine to Fly this incredible replica RC plane.    

Features:
- All Balsa and lite-ply construction
- Fully covered in weathered detail
- Fiberglass cowling
- Control surfaces pre-hinged and installed
-Two piece wing with aluminium wing joiner
- Pilot door and rear door can open-close
- Big battery hatch for Electric version

What's in the Box:
- Assembly instructions with stage photos
- Plywood seat
- Fiberglass cowling
- Aluminium landing gear , & Wheels
- Landing Struts
- Aluminium wing joiner
- Wing struts
- Engine mounts
- Spinner
- Fuel tank
- Decals and all hardware

What you Need to Fly:
Radio System (Transmitter, Receiver, Servos)
Power System (Brushless Power or nitro),
Battery Pack, Glue, Silicone Fuel Line (for nitro engine, Fuel, and electric starter)
Work for Assembly, setup etc..