ZMR UBEC V3 8A for RC-Drones, Planes, Boats, etc..
Suitable for multi-rotor aircraft, fixed-wing, FPV, high-power image transmission, etc. (If 12V voltage is required, the input voltage must be higher than 12V) No external power-off switch is included. Switching technology to gain a much higher efficiency than a linear BEC, this means less heat and longer battery life. The UBEC is equiped with a noise reduction alloy housing to reduce noise even further
- Over-current and over-heat protection
- Conversion efficiency is over 93%
- Reduces electromagnetic interference, ensure the normal operation of the receiver
- LED Indicator for normal state is always on.
- External power-off switch, which is more convenient to use. When this switch is not needed, it can be removed directly.
- Silicone Wires for Input and Output
Input voltage: 4-8S LiPo (15-36V)
Output voltage: One way 12V fixed output. Another way 5.2V/6V/7.4V/8.4 route is optional
Output Current: 5.2 - 8.4V: 8A Instantaneous 16A 12V: Continuous 4A Instantaneous 6A
Input wire: AWG16, Output wire: AWG22
What you Get:
1 x ZMR V3 UBEC 8A
Notes: When using 12V output, please use Lipo above 4s.